Aligning the appliance doors
The appliance doors can be aligned with the housing after they have been fitted.
In the following illustration the door is not shown in the closed position to make it easier to see what you have to do.
Align the lower door using the long outer slots in the lower hinge plate:
Align the upper door using the long outer slots in the middle hinge plate:
^ Slightly loosen the three screws c. |
^Align the door by sliding the hinge plate to the left or right.
^Then tighten screws c.
^Remove centre screw a from the hinge plate.
^Slightly loosen both outer screws b.
^Align the door by sliding the hinge plate to the left or right.
^Then tighten screws b again. Screw a does not need to be used again.
69
