![Removing the lower soft-close door mechanism](/images/new-backgrounds/65703/65703123x1.webp)
Changing the door hinging
Caution. The upper door is not secure as soon as the upper hinge plate is removed.
^Close the upper door.
^Undo screws m in upper hinge plate n and pull it upwards and off.
^Carefully lift the upper door off and place it to one side.
^Make sure that you leave the hinge pin in the hinge plate in the middle of the appliance, as otherwise the lower door will be unsecured.
^Then fit cover h together with retainer i on the opposite side.
^Refit cover l on the opposite side.
Removing the lower soft-close door mechanism
^ Open the lower door. |
^Prise open panel a from the
Take care not to damage the door seal.
If the door seal becomes damaged, the door will no longer close properly and cooling will be impaired.
^Slide panel a towards the appliance, and leave it hanging between the door and the appliance.
^Fit restraining clip b (supplied with the appliance) onto
The restraining clip stops the hinge from snapping shut. Do not remove the clip until told to do so.
^Carefully remove cover d from the side using a
^With the help of another person, tip the appliance back slightly.
62