Miele KFN 14947 SDE ED Changing the door hinging, Removing the door handles

Models: KFN 14947 SDE ED

1 72
Download 72 pages 41.14 Kb
Page 59
Image 59
Changing the door hinging

Changing the door hinging

The appliance is supplied right-hand hinged. If left-hand door hinging is required, follow the instructions below.

To change the door hinging you will need the following tools:

a cross-slotted screwdriver,

a flat-bladed screwdriver,

a selection of Torx screwdrivers,

a spanner.

Two people are needed for changing the door hinging.

Removing the door handles

^Pull door handle a towards you. Side section b slides back.

^Pull side section b firmly back out of the guides on the mounting plate.

^Undo the 4 screws (Torx 15) in the mounting plate, and remove the handle.

^Remove the cover caps from the opposite side, and fit them into the empty holes.

59

Page 59
Image 59
Miele KFN 14947 SDE ED installation instructions Changing the door hinging, Removing the door handles