Making ice cubes
For the automatic ice cube maker to operate it must be connected to the mains water supply.
Switching on the ice cube maker
^ | Switch on the freezer section. |
^ | Open the top left drawer a little. |
^Press the On/Off button on the ice cube maker. The indicator light will come on.
^Close the drawer.
The drawer must be completely shut for ice cubes to be produced.
After the appliance is switched on for the first time it can take up to 24 hours for the first ice cubes to drop out of the ice cube maker and collect in the drawer.
Thereafter, when the ice cube maker is switched off and then on again it will take up to a maximum of 6 hours for ice cubes to be produced.
To ensure that the water pipes are thoroughly flushed through before use, ice cubes from the first three ice cube making processes must not be consumed.
This applies not only to when the appliance is installed for the first time but also if the appliance has been out of use for a longer period (e.g. whilst on holiday).
Making a large amount of ice cubes
The amount of ice cubes which the appliance makes depends on the temperature in the freezer section. The lower the temperature, the more ice cubes are produced within a certain time frame.
Ice cube production is halted automatically as soon as the ice cube drawer is full.
If you require a large amount of ice cubes,
^replace the full ice cube drawer with the drawer beside it on the right.
The ice cube maker will begin to produce ice cubes again as soon as this new drawer has been placed in position and closed properly.
38
