Cleaning and care
It is important to do this every time the stainless steel surfaces are cleaned, as the stainless steel conditioner protects the surfaces and helps prevent
Cleaning the ice cube tray
The ice cubes are formed in a tray before they are dropped down into the drawer.
This tray should be cleaned regularly to remove any stale ice or water.
^Connect the appliance to the electricity supply.
^Open the top left drawer a little.
^Press the On/Off button on the ice cube maker. The indicator light will come on.
^Empty the ice cube drawer.
^Press the On/Off button on the ice cube maker and hold it pressed in for approx. 10 seconds (after about a second, the ice cube maker will switch off and the indicator light will go out).
The indicator light will flash.
^Push the ice cube drawer in as far as it will go within the next 60 seconds.
The ice cube tray will then rotate into an angled position which makes it easier for cleaning:
^Wait until the ice cube tray has completed this rotation before continuing.
^Then take the ice cube drawer out of the appliance and clean it.
^Now clean the ice cube tray with hot water and a little
^Press the On/Off button on the ice cube maker.
^Then put the ice cube drawer back in the appliance and close it.
The ice cube tray will return to its original position.
The ice cube maker will begin to produce ice cubes again after a maximum of 6 hours.
If the ice cube maker has not been used for a while, it is important to clean the ice cube tray before using it again.
43
