Changing the door hinging
^Remove cap l from the bush in the door and refit on the opposite side.
Refitting the lower door
^Remove cover a by pulling it forwards.
^Pull cover b off.
^Screw the foot into hinge pin c as far as it will go.
^With the help of another person, carefully tilt the appliance backwards and pull hinge pin c out.
^Take care not to lose hinge bush d.
^Undo screws e and take hinge plate f off.
^Remove cover g and undo the screws. Refit the screws and cover on the opposite side.
^Refit hinge plate f onto the other side using the 2 outer screws. To make it possible to align the door later, do not replace the centre screw at this stage.
^Unscrew part h from hinge plate f, rotate it by 180° and refit into the hole on the opposite side of the hinge plate.
^Refit cover b on the opposite side.
^With the help of another person, carefully tip the appliance back and refit hinge pin c from below into hinge plate f. The notch at the bottom of the hinge plate should face forwards.
^Replace hinge bush d on hinge pin c.
^Refit cover a.
^Place the lower door onto hinge pin c from above.
^Close the lower appliance door.
64
