Switching on and off
Before using for the first time
The stainless steel external and internal surfaces of the appliance have a layer of protective foil to prevent scratching during transportation.
^Do not remove this foil until the appliance has been installed or built in.
^After removing the protective foil, treat stainless steel surfaces with a suitable stainless steel conditioning agent (available from
Important: Stainless steel conditioner gives long lasting protection, and helps to prevent resoiling.
^Clean the inside of the appliance and the accessories with lukewarm water and a little
Important:
To ensure the correct functioning of the appliance, let it stand for between 1½ and 2 hours after transporting it to its final location before connecting it to the mains.
Active charcoal filters (Active AirClean filters)
^Place the active charcoal filters supplied in the holder, and place the holder on one of the refrigerator shelves (see "Active charcoal filters").
Operating the appliance
A light touch of the finger on the sensors is all that is required to operate this appliance.
Switching on
The refrigerator section/PefectFresh zone and freezer sections are switched on together with the On/Off sensor.
^Touch the On/Off sensor until the temperature display lights up.
The temperature display for the refrigerator section will show the current temperature in the refrigerator section.
If the temperature in the freezer section is above 0 °C, only bars will light up in the temperature display for the freezer section. As soon as the temperature is below 0 °C, the temperature display for the freezer section will show the current temperature in the freezer section.
The "Freezer" symbol and the Alarm off sensor will flash until the temperature in the freezer section has cooled down to the correct temperature for freezing.
The appliance will start to cool, and the interior lighting will come on when the refrigerator section door is opened.
14
