Cleaning
Document feeder
If misfeeding occurs frequently or if dirty patterns or black bands appear on a copied or transmitted document, clean the document feeder.
1
2
3 Clean the document feeder rollers, sub roller and rubber flap with a cloth moistened with isopropyl rubbing alcohol, and let all parts dry thoroughly.
4 Cleancloth. the white plate and glass with a soft dry
Cover open button
Telephone line cord
Power cord
Rubber flap
Sub roller
Document feeder rollers
5 | Close the cover securely by pushing down on the |
|
|
dotted area at both ends. |
|
| |
6 cord.Connect the power cord and the telephone line |
|
| |
Caution: | Glass |
| |
● Do not use paper products, such as paper towels |
| ||
White plate |
| ||
or tissues, to clean the inside of the unit. |
| ||
|
| ||
■ Cleaning the center rib on the film cartridge: |
| Center rib | |
If a black line appears in the center of a copied or received |
| Turn over | |
document, remove the film cartridge, turn it over and clean |
| ||
|
| ||
the center rib with a soft dry cloth. Replace the film cartridge |
| ||
in its original position. |
|
| |
Thermal head and black bar
If dirty patterns or black or white bands appear on a copied or received document, clean the thermal head and black bar.
1 | Disconnect the power cord and the telephone |
line cord. | |
2 | Open the cover by pressing the cover open button. |
3 | Clean the thermal head and black bar with a cloth |
moistened with isopropyl rubbing alcohol, and let it | |
| dry thoroughly. |
4 | Close the cover securely by pushing down on the |
dotted area at both ends. | |
5 | cord.Connect the power cord and the telephone line |
Caution:
●To prevent a malfunction due to static electricity, do not use a dry cloth and do not touch the thermal head directly with your fingers.
Thermal head
Black bar 
126
