Panasonic KX-FP101AL, KX-FM131AL Receive mode, Copying, Answering device KX-FP121/KX-FM131 only

Operations

Receive mode

Problem	Cause & Remedy
I cannot select the desired receive	● If you want to set the TAD/FAX (KX-FP121/KX-FM131 only),
mode.	FAX ONLY or TEL/FAX mode:
	– Select the desired mode using feature #77 (p. 73, 78), and
	– Press AUTO ANSWER to turn on the AUTO ANSWER light.
	AUTO ANSWER
	FAX ON
		ON

●If you want to set the TEL mode:

– Press AUTO ANSWER to turn off the AUTO ANSWER light.

AUTO ANSWER

FAX ON

OFF

Copying

	Problem		Cause & Remedy
The unit does not make a copy.			● You cannot make a copy during programming. Make the copy
			after programming or stop the programming.
A dirty pattern or a black line			● The glass or rollers are dirty. Clean them (p. 126).
appears on the copied document.			● The center rib is dirty. Clean it (p. 126).
The copied image is distorted.			● The thermal head is dirty. Clean it (p. 126).
The printing quality is poor.			● Some paper has instructions recommending which side to print
			on. Try turning the paper over.
The printing is faint.			● You may have used paper with a cotton and/or fiber content that
	Original	Copy	is over 20%, such as letterhead or resume paper.
	A B C
The document is not copied properly.			● The film is not inserted correctly. Insert it correctly (p. 124, 125).
The copied document is blank.			● The film is not inserted correctly. Insert it correctly (p. 124, 125).

A paper jam occurs during copying.

●The film is not inserted correctly. Insert it correctly (p. 124, 125).

Answering device (KX-FP121/KX-FM131 only)

Problem	Cause & Remedy
No voice messages have been	● The memory is full. Erase some or all of the messages
recorded in the TAD/FAX mode.	(p. 98, 104).
I cannot retrieve recorded messages	● Make sure that you use the remote operation ID correctly
from a remote telephone.	(p. 102).

116