Sending Faxes
From memory
The unit is able to scan and store documents into memory, and then transmit the stored document. The memory capacity is approx. 25 pages based on the CCITT No. 1 Test Chart in standard resolution. For the CCITT No. 1 Test Chart, see page 131.
Transmitting documents from memory
1 | Insert the document FACE DOWN. |
2 | Enter the fax number using the dial keypad. |
3 | Press QUICK SCAN . |
● The document will be fed into the unit and scanned into memory.
After storing all of the pages, the unit will transmit the document.
● The amount of memory used will be shown as a percentage on the display.
Display: PAGES=01 05
Amount of memory used (%) 
Note:
QUICK SCAN
STOP
●The stored document will be automatically erased after transmission.
●To cancel the memory transmission, press STOP during or after scanning the document.
●If you select the fine, super fine or half tone resolution, the number of documents that can be sent will decrease.
●If the stored pages exceed the memory capacity, the transmission will be cancelled.
●If the other party’s fax number is written on the document, you can enter the number by referring to the document before inserting it.
58
