Ink Film
Replacing the film or film cartridge
When the unit detects the end of the film, the following message will be displayed.
Display: | FILM | NEAR | EMPTY | The remaining film prints about 10 pages of A4 size document. | |
Prepare a new film or film cartridge. | |||||
|
|
|
| ||
|
|
|
| ||
|
|
|
| The film is empty. Install a new film or film cartridge. | |
| FILM | EMPTY |
| ||
|
|
|
|
|
The following is available for replacement:
●Replacement film
■Changing the film cartridge (KX-FA137A)
1
2
Open the cover by pressing the cover open button.
Remove the used film cartridge.
Film cartridge
Cover open button
3 | Remove the film stopper from the new film | ||
cartridge by pressing it up. Turn the film cartridge | |||
| over so that the attached sticker is facing up. | ||
| ● If the film is slack, tighten it by winding the | ||
| gears. |
|
|
| Incorrect | Correct | |
|
|
| |
|
|
|
|
|
| Tight | |
4 | Replace the film cartridge by first placing the front | ||
of the cartridge into the unit and then lowering the | |||
| back of the cartridge, where there is an attached | ||
| sticker, into place. |
|
|
5 | Close the cover securely by pushing down on the | ||
dotted area at both ends. |
|
| |
| ● The unit will check that film is installed correctly. | ||
| The following message will be displayed. | ||
| Display: |
|
|
| PLEASE WAIT | ||
|
|
|
|
| ● If the following message is displayed, the film | ||
| cartridge is not inserted correctly. |
CHECK FILM
Reinsert it correctly.
Turn over
Film stopper
Sticker
Sticker
Film cartridge
Help
123