Panasonic KX-FP101AL manual One-Touch Dial, To keep the telephone number secret, Hyphen Secret

One-Touch Dial

Storing names and telephone numbers in the One-Touch Dial

The unit’s memory allows you to use the One-Touch Dial for rapid access to your most frequently dialled numbers. 6 stations are available.

●One-Touch Dial keys 1, 2 or 3 can be used as One-Touch Dial keys (DIAL MODE) or as broadcast keys (BROADCAST). These functions cannot be used at the same time. For the broadcast function, see pages 59 to 62.

1	Press DIRECTORY PROGRAM .
	Display:	PRESS STATION
		USE EASY	DIAL
2	For stations 1–3
	Press one of the One-Touch Dial keys.
		DIAL MODE	▼▲
	Press START/SET/COPY
		to go to the next prompt.
	For stations 4–6
	Press LOWER , then press one of the One-Touch
3	Dial keys.
	Enter the station name, up to 10 characters, by
	following the instructions on page 31.
	Example:
		NAME=John
4
	Press START/SET/COPY .
	Example:	<S02>=
5
	Enter the telephone number up to 30 digits.
	Example:	<S02>=1114497
	● If you want to enter a hyphen, press HYPHEN
	(One-Touch Dial key 1).
6	Press START/SET/COPY .
		REGISTERED
		PRESS STATION

USE EASY DIAL

●To program other stations, repeat steps 2 to 6.

7 Press DIRECTORY PROGRAM to exit the program.

Note:

●If “DIAL MODE” is not displayed when you select stations 1, 2 or 3 in step 2, the broadcast function has

been set. To use the station as a One-Touch Dial key,

press to select “DIAL MODE”. The broadcast function will be cancelled.

●A hyphen entered in a telephone number is counted as two digits.

HYPHEN SECRET

One-Touch

Dial keys

1 2 3

4 5 6

7 8 9

0

START/SET/COPY LOWER

DIRECTORY PROGRAM

Helpful hint:

●You can confirm the stored items on the display (p. 42) or on the telephone number list (p. 127).

To keep the telephone number secret

Press SECRET (One-Touch Dial key 3) after entering the telephone number in step 5.

●A secret number cannot be viewed after this is set.

●The telephone number will not appear on the telephone number list.

●Pressing SECRET does not count as a digit.

To edit a stored station name and number

Enter the desired name in step 3. Enter the desired number in step 5.

To erase a stored station name and number, see page 41.

38