Fujitsu Siemens Computers V2035 Acoustic warnings, Error messages on the screen, CMOS Battery Bad

Models: V2035

1 84
Download 84 pages 32.29 Kb
Page 75
Image 75
Acoustic warnings

Troubleshooting and tips

Acoustic warnings

A beep sounds every few seconds.

The battery is almost flat.

Charge the battery.

Error messages on the screen

This section describes the error messages generated by the BIOS Setup Utility. Error messages displayed by the operating system or programmes are described in the relevant documentation.

CMOS Battery Bad

If the error message occurs repeatedly, the buffer battery in the notebook is flat. Contact your sales outlet or our hotline/help desk.

System CMOS checksum bad - Default configuration used

The system configuration information is incorrect.

Switch the notebook off.

Switch the notebook on.

Enter the BIOS Setup Utility by pressing F2 .

Select the entry Load Setup Defaults.

Mark OK.

Press the Enter key.

If the error message appears repeatedly, please contact the place of purchase or our hotline/help desk.

Extended memory failed at offset: xxxx Failing Bits: zzzz zzzz

When testing the extended memory an error has resulted at the address xxxx.

Check whether the additional memory module has been inserted correctly.

If the error message appears repeatedly, please contact the place of purchase or our hotline/help desk.

Keyboard controller error

Switch the notebook off with the ON/OFF switch.

Wait 3 - 5 seconds and switch on the notebook again.

If the error message appears repeatedly, please contact the place of purchase or our hotline/help desk.

A26391-K183-Z121-1-7619, edition 1

65

Page 75
Image 75
Fujitsu Siemens Computers V2035 manual Acoustic warnings, Error messages on the screen, A beep sounds every few seconds