Connecting external devices
Back panel
|
|
|
|
|
|
|
|
|
|
|
|
| 1 | 2 | 3 | ||
|
|
|
|
|
|
1 = | USB ports |
|
| 3 = Kensington Lock | |
2 = | Monitor port |
|
|
|
|
Connecting an external monitor
An external monitor can be connected to the notebook.
●Using the Fn + F3 key combination you can switch back and forth between the external monitor and the LCD screen.
●If your notebook is equipped with a TFT monitor, you can display the same picture on the external monitor and the LCD screen simultaneously.
►Switch off the notebook and the external monitor.
►Connect the data cable of the external monitor to the monitor port of the notebook.
►First switch on the monitor and then the notebook.
Setting the refresh rate for your external monitor
The refresh rate must be correctly set so that the image does not flicker.
►Select the monitor type in the menu Start - (Settings) - Control Panel - Display - Settings - Advanced - Monitor.
►Now select the Adapter tab.
►Adjust the refresh rate and click Apply.
! | If the refresh rate set is too high, the monitor may be damaged. Please see the | |
documentation included with your monitor for the maximum possible refresh rate. | ||
|
47 |
