WIRELESS NETWORK CONSIDERATIONS
■The Atheros SuperAG WLAN device supports IEEE802.11a, IEEE802.11b, and IEEE802.11g.
■The WLAN device operates in the 2.4 GHz ISM band and the 5 GHz lower, middle, and upper UNII bands.
■Microwave ovens may interfere with the operation of WLAN devices since they operate in the same 2.4 GHz frequency range as IEEE802.11b/g/n devices. Interference by microwaves does not occur with IEEE802.11a radio which operates in the 5 GHz RF band.
■Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN devices in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput, intermittent discon- nects, and many frame errors. It is HIGHLY recom- mended that these interfering devices be powered off to ensure proper operation of the WLAN device.
DEACTIVATING THE WLAN DEVICE
Deactivation of the WLAN device may be desired in certain circumstances (to extend battery life) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). Fujitsu mobile computers employ two methods with which to deactivate the WLAN device:
■Using the Wireless On/Off Switch, or,
■In Windows XP, using the Atheros Client Utility software.
W I r e l e s s L A N U s e r ’ s G u i d e
Before using the wireless LAN device, you must first install ClickMe! to ensure that the correct software for your device is installed.
page 31 for more information)
Deactivation using the Wireless On/Off Switch
The WLAN device can be deactivated quickly and effi- ciently by toggling the Wireless On/Off Switch to the Off position. (Figure
The Wireless On/Off switch has no effect on
Figure A-3. Wireless LAN On/Off Switch
Figure A-2. Access Point(Infrastructure) Mode Network
ADSL modem,
Internetcable modem, or similar
Wireless LAN
Wired LAN
Access Point*
*An optional hub for a wired LAN may be required depending upon the type of access point used.
89
