Continued Next Page

Step 4: Wiring Information (continued)

IMPORTANT! Additional Wiring Notes:

•For heat pumps with O and B both present, connect O wire to O terminal and B wire to C terminal (NOTE:

This is typically for Trane Heat Pump products only.) Do not connect B wire to B terminal as it may damage the 24VAC power system.

•For LENNOX Pulse systems, please contact customer support or contact your HVAC professional for specific information regarding installing the Z-Wave®Enabled Thermostat with your system.

•Use 18- to 22-gauge thermostat wire.

•Your Z-Wave® enabled thermostat must have a C wire (electrical power) and cannot operate from batteries alone. Batteries are for back up only.

•If you are unsure of how to connect your system, please call customer support for additional information or contact an HVAC professional.

•If you have 2 large wires (12 or 14 gauge or if it is bigger than paper clip wire) or know that your system operates on line voltage, immediately stop, re-install your existing thermostat and contact customer support. The Wayne-Dalton Z-Wave®Enabled thermostat operates on 24 Volts AC power only.

Installation

COOL

RESET

NORMAL SAVE

HEAT

 

AUTO

ENERGY

COOL

ON

 

 

 

FAN

Reset

JP5 JP3 JP4 JP1 JP2

Jumper Reference Guide

The number below corresponds to the bubble number above.

JP5 --Fan Control: a) NO FAN -No fan control even with switch on front of thermostat (RARE.)(No jumper)

b)ELECT - Fan is controlled from thermostat. (Jumper on top 4 pins)

c)GAS - Fan is controlled by furnace. (Jumper on bottom 4 pins)

JP3 --Heat Pump Type: a) OFF - No heat pump system present (Conventional HVAC System) ( No Jumper)

b)ON - Bypasses heat pump 1st stage and immediately triggers auxiliary heating. (Eliminates time delay for effectively heating homes located in colder climates.) (Jumper on top 4 pins)

c)Heat Pump - Normal heat pump setting to activate both stages.

(Jumper on bottom 4 pins)

JP4 --Power: a) RC-RH Connected - For single transformer systems. (Jumper on both pins)

b)RC-RH Separate - For systems with a separate transformer for A/C and heat. (No Jumper) JP1 --Celsius/Fahrenheit: a) °C - Thermostat will display in degrees Celsius. (Jumper on both pins)

b)°F - Thermostat will display in degrees Fahrenheit. (No Jumper )

JP2 --Heat Pump Auxiliary Type: a) Fossil fuels - Natural gas, propane, or oil auxiliary system. (Jumper on both pins)

b)Elect - Electric auxiliary system. (No Jumper)

Reset --Reset Button - Always press the reset button after changing jumper settings.

NOTE: Unused jumpers may be stored by attaching them to a single pin.

11

Page 10 Page 12
Page 11
Image 11
Wayne-Dalton WDTC-20 user manual Reset, Jumper Reference Guide, IMPORTANT! Additional Wiring Notes, JP5 JP3 JP4 JP1 JP2
Page 10 Page 12

WDTC-20 specifications

The Wayne-Dalton WDTC-20 is an innovative and versatile garage door opener that stands out in terms of performance, security, and user-friendliness. Designed by Wayne-Dalton, a leader in the garage door industry, the WDTC-20 incorporates modern technologies to provide homeowners with a complete solution for their garage access needs.

One of the main features of the WDTC-20 is its powerful motor which delivers reliable lifting force suitable for standard and heavier doors. The unit is engineered to ensure smooth and quiet operation, making it ideal for residential use where noise reduction is a priority. The opener is compatible with various door types, allowing for easy integration with sectional or one-piece garage doors.

The WDTC-20 incorporates advanced security technology with its rolling code feature. This system generates a new code every time the remote is used, significantly reducing the risk of unauthorized access. Additionally, the opener includes a secure manual release system, providing peace of mind in case of power outages.

A hallmark of the WDTC-20 is its user-friendly interface. The opener features a bright LED lighting system that illuminates the garage space, enhancing visibility during entry and exit. The unit also boasts a wireless keypad option that allows users to open the garage door without needing to carry a remote. This is particularly convenient for households with multiple users.

For tech-savvy homeowners, the WDTC-20 offers smartphone compatibility through its smart hub. By connecting to a home Wi-Fi network, users can control and monitor the garage door remotely via a mobile app. This feature allows notifications for door status, facilitating enhanced security and operability.

In terms of installation, the WDTC-20 is designed for easy and straightforward setup, enabling users to quickly benefit from its extensive features. Additionally, Wayne-Dalton offers robust customer support and a warranty program for peace of mind.

Overall, the Wayne-Dalton WDTC-20 combines strength, security, and technological innovation, making it a compelling choice for anyone in need of a modern garage door opener. Its blend of convenience and safety features ensures that it caters well to the dynamic needs of contemporary living.
Top Page Image Contents