Wayne-Dalton WDTC-20 user manual Programming Examples, Continued Next Page

Programming Examples

28

Z-Wave®Programming

ThinkEssentials® Example

EXAMPLE: Programming the Z-Wave®Thermostat to ThinkEssentials® software

NOTE: The following directions apply only to Wayne-Dalton’s WDUSB- 10R, Z-Wave®USB Adapter, and ThinkEssentials® software.

1.Open ThinkEssentials® to the HOME tab and then ensure the DESIGN TAB is active by pressing it with your mouse.

2.Press the ADD DEVICE button in the ThinkEssentials® window.

3.Press and release the BIND button on the thermostat. If successful, ThinkEssentials® will display a message that the device was added successfully and a thermostat icon will appear.

The thermostat icon will appear red when in NORMAL mode and GREEN when in SAVE ENERGY mode. The current room temperature will also be displayed.

Red Thermostat Icon is

NORMAL mode

Green Thermostat Icon is

SAVE ENERGY mode

Step 1: Activate DESIGN tab

Step 2: Adding thermostat

3 

COOL

RESET

NORMAL SAVE

ENERGY

Continued Next Page