Fujitsu Siemens Computers V2035 manual The notebook stops working, The mouse does not work

Models: V2035

1 84
Download 84 pages 32.29 Kb
Page 74
Image 74
Operating system files may be damaged or missing.

Troubleshooting and tips

Operating system files may be damaged or missing.

Boot the notebook via the optical drive using the "Windows XP Recovery CD".

i

If the operating system is reinstalled, all data created up to that point will be lost. Make

regular back-up copies of your data.

The notebook stops working

The notebook is in Standby or Suspend mode.

Reactivate the notebook by pressing a key (Standby mode) or by switching it back on (Suspend mode).

The application programme has caused the malfunction.

Close the application programme or restart the notebook by switching it on/off or with a warm boot.

The battery is dead.

Charge the battery.

or

Install a charged battery.

or

Connect the mains adapter to the notebook.

The mouse does not work

Mouse is not connected

Switch the notebook off.

Check whether the mouse cable is correctly connected to the notebook.

If you use an adapter or extension lead with the mouse cable, check the connections.

Switch the notebook on.

The printer does not print

Make sure that the printer is switched on and is on-line (see the manuals supplied with the printer).

Check that the cable connecting the notebook and the printer is connected properly.

Check whether the correct printer driver is loaded (see printer documentation).

64

A26391-K183-Z121-1-7619, edition 1

Page 74
Image 74
Fujitsu Siemens Computers V2035 manual The notebook stops working, The mouse does not work, The printer does not print