KTI Networks KCD-302 Series Applying Power, DC Power Input Specification, DC PowerTerminal Block

2.4 Applying Power

The product provide two types of power interfaces, terminal block and DC power jack for receivingDC power input from external power supply.

DC Power Input Specification
Operating Voltage	+7~+30VDC
Power Consumption	Max.3.0W@30VDC
DC PowerTerminal Block
Connectors	Screw-type Terminal block (2 sets)
Pin Assignments	DC1+ -	Positive (+) Negative (-) terminals
	DC2+ -	2nd Positive (+) Negative (-) terminals
Power wires	24 ~ 12AWG(IEC 0.5~2.5mm2)

The steps to install power wires to the terminal block are:

1.Loose the terminal screw to open the contact for power wire insertion. Insert power wire into the contact.

2. Screw the terminal and make sure power wire is fixed securely.

-21-