KTI Networks KCD-302 Series

-20-

2. Mount and screw the device on the target surface. The final dimen-

sion after bracket installation is also shown below:

Make sure that there are proper heat dissipation from and adequate ven-

tilation around the device. Do not place heavy objects on the device.

Contents

Main Page Page Table of Contents 1. Introduction......................................................... 5 2. Installation......................................................... 15 3 Configuration Switches & LED Indicators....... 25 Page Page 1.1 Features Page Page Configuration Setting Switches (SW) LED Indicators Page Page 1.3 Model Specifications The media converter series provides the following fiber options: Optical Specifications 1.4 Special Functions 2. Installation Page Page Page Page Page 2.4 Applying Power Page 2.5 Making TP Port Connection Page Page 3.1 Configuration Switches 3.1.1 TP Port Settings SW1-SW3 3.1.2 802.3x Function Setting SW4 3.1.3 FX Port Duplex Settings SW5 SW6 3.1.4 Factory Default Settings 3.2 LED Indicators