KTI Networks KCD-302 Series

-19-

2.3 Mounting on a Panel Surface

An optional mounting bracket, as shown below is also available for mount-

ing the device on a panel surface such as a wall, a wood board, or a metal

plate in an industrial enclosure.

To mount the device on a panel surface, the steps are:

1. Clamp the bracket into the device and align the bracket with the

bottom surface of the device and screw it on the converter firmly as

shown below:

Contents

Main Page Page Table of Contents 1. Introduction......................................................... 5 2. Installation......................................................... 15 3 Configuration Switches & LED Indicators....... 25 Page Page 1.1 Features Page Page Configuration Setting Switches (SW) LED Indicators Page Page 1.3 Model Specifications The media converter series provides the following fiber options: Optical Specifications 1.4 Special Functions 2. Installation Page Page Page Page Page 2.4 Applying Power Page 2.5 Making TP Port Connection Page Page 3.1 Configuration Switches 3.1.1 TP Port Settings SW1-SW3 3.1.2 802.3x Function Setting SW4 3.1.3 FX Port Duplex Settings SW5 SW6 3.1.4 Factory Default Settings 3.2 LED Indicators