KTI Networks KCD-302 Series manual DC Power Jack

DC2 + andDC2 - can be installed with another power-pair for delivering the main power input to next converter in a cascading way.

Note: Only up to four device units can be cascaded to receive power from one main power input source.

DC Power Jack
Connector:	Jack D 6.3mm	D 2.0mm

AC Power Adapters: Optional commercial rated adapters are available for purchasing.

Rated AC120V/60Hz DC7.5V 1A

Rated AC230V/50Hz DC7.5V 1A

Rated AC100V/50-60Hz DC7.5V 1A

Rated AC240V/50Hz DC7.5V 1A

Steps to apply the power to the device are:

1.Connect power adapter DC plug to the DC power jack of the converter before connecting to the AC outlet.

2. Connect the power adapter to the AC outlet.

Note: Before you begin the installation, check the AC voltage of your area. The AC power adapter which is used to supply the DC power for the unit should have the AC voltage matching the commercial power voltage in your area.

-22-