Manuals / KTI Networks / Computer Equipment / Switch

KTI Networks KGS-2401 Check the box to enable egress tagging before packet transmission, Tagging

Models: KGS-2401

1 41

Page 19

PVID

When the VLAN-enabled switch receives a untagged packet, the packet will be sent to the port default VLAN according to the PVID (port VLAN ID) of the ingress port.

Settings	Functions
Port	Port Number 1~24
PVID	Port VLAN ID(1~4094)
	For Ingress VLAN mapping rules, refer to the following table:
	Only Tagged	Received Packet Type	VLAN entry mapped
	Disable	Untagged	Ingress port PVID
	Disable	Tagged	Received packet VID
	Enable	Untagged	Drop received packet
	Enable	Tagged	Received packet VID
EgressTagging	Check the box to enable egress tagging before packet transmission.

For the detail egress tagging rules, refer to the following table:

	Tagging	Received Packet	Egress Packet
	Disable	Untagged	Untagged (no modification)
		Tagged	Untagged (VID tag is removed)
	Enable	Untagged	Insert VID Tag with ingress port PVID
		Tagged	Tagged (no modification)
Only Tagged	Check box to enable the port to drop all received untagged frames
Apply	Click button to save the changes you made.

-19-

Page 19

Image 19

KTI Networks KGS-2401 Check the box to enable egress tagging before packet transmission, Only Tagged, Received Packet Type

Contents

DOC.041223 24-Port Gigabit Ethernet Switch KGS-2401 Installation GuideHouston, Texas Phone Fax E-mail kti@ktinet.com For more information, contact United States KTI Networks Inc P.O. BOXInternational Fax E-mail kti@ktinet.com.tw CISPR A COMPLIANCE TRADEMARKS1. Unpacking Information 3. Installing 24-Port Gigabit Web Smart Switch6. Product Specifications 7. Command Line Interface8. Factory Default Configuration 3. Rubber foot and screws 4. Rack-mount brackets 1. Unpacking Information1. One 24-port Gigabit Web Smart Switch 2. One power cord The product package should include the following2.2 Key Features 2. Introduction to 24-port Gigabit Web Smart Switch2.1 General Description Duplex Mode Wiring2.3 The Front Panel SpeedStatus 2.4 The Rear PanelPort LED summary table LEDs2.1 Desktop Installation 3. Installing 24-Port Gigabit Web Smart Switch3.2 Rack-mount Installation Station Connections 3.3 Installing Network Cables3.4 Network Application Switch-to-Switch Connections4.2 Flow Control 4.6 Quality of Service4. Functional Description 4.1 PHY Monitoring and Port Mode Set-up5. Web Management guide 5.1 Access the Switch3. After authentication procedure, the home page shows up 5.2 Home PageSystem Ports VLAN Aggregation QoS Mirror Statistics Discovery Page Status & Setting 5.2.1 SystemFunctions 5.2.2 Ports To remove the VLAN entry 5.2.3 VLANVLAN Entry To add new VLAN EntryVLAN entry mapped Check the box to enable egress tagging before packet transmissionOnly Tagged Received Packet Type5.2.5 QoS 5.2.4 Aggregation/ Trunking ConfigurationTo select the switch port, from 1 to 5.2.5.1 Quality of Service QoS TOS Configuration5.2.5.3 QoS Port Ingress Rate Control 5.2.5.2 QoS Port Egress Rate Control5.2.5.4 QoS Port Broadcast Storm Functions 5.2.6 Mirror5.2.7 Statistics SettingsRemove 5.2.8 DiscoveryAuto Search Manual Add1. Click Default button on the Home page 5.2.9 Default5.2.10 Reboot To restore all settings to factory default values6. Product Specifications 7.3 Command Hierarchy 7. Command Line Interface7.1 Start-up and Terminal configuration 7.2 Login/Logout ProceduresAt any level 7.4 Help UtilityHelp after a specific command Example Systemconfiguration ? At top level7.5 Entering Commands 7.6 Terminology 7.7 Command DescriptionMAC Address format hh-hh-hh-hh-hh-hh, hhhhhhhhhhhh or 2. System Restore default 7.7.1 System CommandsCommands at the System level 1. System Configuration1.Console Configuration 7.7.2 Console Commands7.7.3 Port Commands Commands at Console level5. Port MaxFrame 2. Port Mode3. Port Flow Control 4. Port State2. MAC Add 7.7.4 MAC Table CommandsCommands at MAC level 1. MAC Configuration5. MAC Flush 7.7.5 VLAN CommandsCommands at VLAN level 1. VLAN Configuration4. VLAN Lookup 7.7.6 Aggregation/trunking CommandsCommands at Aggr level 1. Aggregation Configuration2. Aggregation Add 7.7.7 QoS CommandsCommands at QoS level 1. QoS Configuration5. QoS Storm Control 2. QoS Tosprecedence3. QoS Egress Rate 4. QoS Ingress Rate1. Mirror Configuration 7.7.8 Mirror Commands7.7.9 IP Commands Commands at Mirror level7.8 Example 8. Factory Default Configuration

Only Tagged

Received Packet Type

VLAN entry mapped

Check the box to enable egress tagging before packet transmission.

Tagging

Received Packet

Egress Packet