KTI Networks KGS-2401 manual Help Utility, At top level, At any level, Prompt at top level

When you are at the top level, the prompt shows :>, and if you are at the group level, the prompt displays the group name, e.g. System>.

To be under a certain group, you may enter the group name at top level or add / in front of the group name then press enter at any level. Examples:

At top level:	>system <enter>	New prompt -> System>
At any level:	system>/ip <enter>	New prompt -> IP>

To be at top level, you may enter up at any level. (ex, system>up <enter>).

Note:

All the characters entered in the command line interface are NOT case-sensitive.

7.4 Help Utility

You can get command information by entering ? or help.

Prompt at top level

System	System commands
Console	Console commands
Port	Port commands
MAC	MAC table commands
VLAN	VLAN commands
Aggregation	Aggregation/Trunking commands
QoS	QoS commands
Mirror	Mirror commands
IP	IP commands

Prompt at group level (Example: System>? <enter>)

System Configuration [all]

System Restore default [keepip]

System UserName [<name>]

System Password [<password>]

System systemname [<systemname>]

System Reboot

Help after a specific command (Example: System>configuration ?)

Syntax:

System Configuration [all]

Description:

Show System Name, Username, Password, Software Version, Hardware Version and management MAC address. Optionally show the full configuration [all]: Show the total switch configuration (default: System configuration only)

-28-