KTI Networks KGS-2401 Aggregation/trunking Commands, VLAN Lookup, VLAN EgressTagging, Vlan Pvid

4. VLAN Lookup

Syntax:

VLAN Lookup <vidlist> Description:

Lookup VLAN entry and show port list. <vidlist> : VLAN ID list.

5. VLAN EgressTagging

Syntax:

VLAN EgressTagging [<portlist>] [enabledisable] Description:

Set or show the VLAN Egress Tagging mode for the port. The enabled ports will strip the VLAN tag from received frames and insert the tag in trans- mitted frames (except PVID). The disabled ports will not strip the tag from received frames or insert the tag in transmitted frames. [<portlist>]: Port list (default: All ports).

[enabledisable]: Enable/disable VLAN egress tagging (default: Show awareness).

6. VLAN PVID

Syntax:

VLAN PVID [<portlist>] [<vid>none] Description:

Set or show the port VLAN ID. Untagged frames received on the port will be classified to this VLAN ID. Frames classified to this VLAN ID will be sent untagged on the port.

[<portlist>]: Port list (default: All ports).

[<vid>none]: Port VLAN ID, 1-4094 (default: Show PVID). The none option can be used for trunk links.

7. VLAN Frame Type

Syntax:

VLAN Frame Type [<portlist>] [alltagged] Description:

Set or show the accepted frame type for the port. [<portlist>]: Port list (default: All ports).

[alltagged]: Accept all or only tagged (default: Show frame type).

7.7.6 Aggregation/trunking Commands

Commands at Aggr level:

Aggr Configuration

Aggr Add <portlist>

Aggr Delete <portlist>

Aggr Lookup <portlist>

Aggr Mode [smacdmacxor]

1. Aggregation Configuration

Syntax:

-36-