4.5 Ports
Configuration | Function |
|
|
|
|
|
|
| |||
Enable Jumbo Frames | Select to enable jumbo frame support |
| |||
Port | The port number |
|
|
| |
Link | Speed and duplex status with green background - port is link on | ||||
| Down with red background - port is link down |
| |||
Mode | Select port operating mode |
|
| ||
| Disabled - disable the port operation |
| |||
| Mode | Speed capability | Duplex capability | ||
| Auto |
| Enable | 10, 100, 1000M | Full, Half |
| 10 Half |
| Disable | 10M | Half |
| 10 Full |
| Disable | 10M | Full |
| 100 Half |
| Disable | 100M | Half |
| 100 Full |
| Disable | 100M | Full |
| 1000 Full |
| Enable | 1000M | Full |
| Force 1000 Full | Disable | 1000M | Full | |
Flow Control | Set port flow control function |
|
| ||
| v - set to enable 802.3x pause flow control for ingress and egress | ||||
|
| ||||
[SFP DDM] | Click to display DDM information and status of the SFP transceivers | ||||
[Apply] | Click to apply the configuration change |
| |||
|
|
|
|
|
|
Notes:
1.For 100M fiber application on Port 4 and Port 5, it is necessary to configure 100 Full for the port with fiber connection.
2.For 1000M fiber application on Port 6, just leave the default port configuration Auto for fiber connection.
