Duplex Mode Full duplex | KTI Networks KS-2240 specs

The Gigabit Ethernet module supports auto-negotiation although it only operates on 1000M full-duplex mode. This function makes sure the system operates with maximum performance when it is connected to an auto-negotiation capable Gigabit Ethernet device.

Duplex Mode	Full duplex
Fiber cable	MM 50/125mm, 62.5/125mm recommended

Module Installation

1.Turn off the power to the switch unit.

2.Open the cover of Gigabit slot.

3.Insert the module into slot until it is seated properly.

4. Screw the module onto the chassis securely.

-18-

Page 18

Image 18

KTI Networks KS-2240 manual Duplex Mode Full duplex

Contents

10/100 Fast Ethernet Switch With Gigabit Uplinks Installation GuideKS-2240 International Fax 886-2-26983873 Mail Kti@ktinet.com.tw Port Fast Ethernet Switch With Gigabit Uplinks Installation Guide Trademarks Table of Contents Introduction Features Igmp MIB Specifications Installing the Switch Packing List Panels Gigabit Slot2 Mounting the Switches Desktop Mounting Network Switched Ports Making Network Connections 10/100BASE-TX Fast Ethernet Switched Ports Switch can support connections to the following devices Manual Configuration10/100BASE-TX Fast Ethernet Ports Straight-through and Crossover UTP Cable Gigabit Ethernet Slots Module OutlineGigabit Ethernet Modules Top view Duplex Mode Full duplex Making Trunk Connections Page Virtual LAN Vlan Static Definitions of Vlan MembershipPage Interpretation LED IndicatorsLED Panels States and indications are Performing Network Management Management Support Login Basic Management Activities Management objects Setting IP Address Console Management Navigating Through the Console Interface To Press This Key Web Management Telnet Management Software Upgrade Snmp and Rmon Management Support Contact your dealer for any new available software version