MAINTENANCE

5000TROPR 005893 R022504

ALWAYS STOP MIXER, SHUT OFF TRACTOR ENGINE AND REMOVE DRIVELINE BEFORE SERVICING, REPAIRING, OR CLEANING. IF WORK MUST BE PERFORMED INSIDE THE MIXER, PUT A PROTECTIVE COVER OVER THE AUGER KNIVES TO AVOID INJURY. THE HOPPER FLOOR AND FLIGHTING MAY BE SLIPPERY. USE CAUTION WHEN STEPPING OR STANDING INSIDE THE UNIT. USE SAFE SHOP PROCEDURES AND EXERCISE CAUTION WHEN WORKING ON THIS MIXER!

INSPECT AND ADJUST:

Safety Decals for readability. If any safety decals are removed, obstructed, or otherwise not understandable, they should be replaced immediately. Keep all decals clean - see Safety Decal section for more information.

Safety Shielding to be sure all shielding is in place and functioning properly. Replace all damaged or missing shielding immediately - see parts pages for more information.

Bolts and Set Screws after a few hours of use and each month thereafter. Tighten if necessary.

Auger Knives should be replaced when the long stem material is no longer sufficiently broke up, and there is a noticeable increase in HP requirement.

Inspect knife fasteners to be sure they are tight.

Discharge Chute Augers to keep from rubbing on the chute body: There are shims behind each chute auger bearing for alignment. Periodically check chute liners for wear, replace as necessary.

Discharge Chute Roller Chains to make sure the chains are not excessively loose.

Adjust drive motor to tighten chain, and/or remove half-links.

IMPORTANT: WHEN WELDING ON THIS UNIT: Do Not allow the current to flow through the bearings, roller chains, or scale weigh bars. Ground directly to the item being welded. ALWAYS disconnect the power cord from scale indicator before welding.

Tires must be inflated to proper pressure as indicated below.

 

18 x 22.5 Recap Truck (not for use on 5073)

. 65 PSI

CAUTION: When inflating tires, use

315-80R x 22.5 Recap Truck

. . 65 PSI

385-65R X 22.5 Recap Truck

. . 65 PSI

a clip-on chuck and extension hose

385-80R X 22.5 Recap Truck

. . 65 PSI

long enough to allow you to stand to

34 X 1000 R16 Aircraft (only used on 5032)

. . 85 PSI

one side and not in front of tire

40 x 14.5 Aircraft

. . 85 PSI

 

44 x 16 Aircraft

. . 85 PSI

 

46 x 18 Aircraft

. . 85 PSI

 

33 x 15.5 x 16.5 NHS

. . 65 PSI

 

Clevis Hitch for proper location, alignment and tightness of attaching bolts. If the upper clevis bar becomes excessively worn, the hitch assembly should be unbolted and turned over so the unworn hitch bar is on top, or replaced if both bars are worn. Frequently check the clevis attaching bolts for tightness, and that the clevis is secure. Tighten bolts to 275 ft lbs. Worn or damaged bolts must be replaced.

Wheel Bolts must be kept properly torqued. Damage to rim may occur if wheel bolts are not checked frequently. 8-bolt rim: 170 ft lbs- Grade 8 Lug

10-bolt rim: 300 ft lbs-Grade 8 Lug

Rain can accumulate in mixer if stored outside, always leave the door partially open to allow unit to drain.

In Freezing Weather the PTO shield requires extra grease to prevent freezing. Snow can accumulate in mixer if stored outside, always leave the door partially open to allow unit to drain melted snow and check hopper for snow or ice buildup before operating unit. Remove any ice build up before use.

KUHN KNIGHT, INC.

21

1501 West 7th Ave., Brodhead, WI 53520

 

701 Cherry Ave., Greeley, CO 80632

Page 20 Page 22
Page 21
Image 21
Kuhn Rikon 5000 Series, Verti-Maxx Mixer instruction manual Maintenance, Inspect and Adjust
Page 20 Page 22

5000 Series, Verti-Maxx Mixer specifications

The Kuhn Rikon Verti-Maxx Mixer, 5000 Series, represents a significant advancement in kitchen technology designed for both home chefs and culinary professionals. This innovative mixer combines functionality with precision, ensuring a seamless mixing experience for a variety of recipes.

One of the standout features of the Verti-Maxx Mixer is its unique vertical design. Unlike traditional mixers, this model utilizes a vertical mixing bowl that allows for more efficient mixing and aeration of ingredients. This design not only saves counter space but also ensures that even dense mixtures achieve optimal consistency without the need for excessive manual intervention.

The mixer is equipped with a robust, high-performance motor that delivers reliable power for a range of mixing tasks. Whether you are whipping cream, kneading dough, or mixing cake batter, the Verti-Maxx provides consistent results every time. With multiple speed settings, users can customize the mixing intensity to suit their needs, ensuring perfect results whether working with light or heavy ingredients.

In terms of technology, the Kuhn Rikon Verti-Maxx incorporates a patented mixing mechanism that minimizes air pockets and enhances the overall mixing process. This innovative system allows for a thorough blend of ingredients, reducing mixing time and increasing efficiency in the kitchen. The inclusion of an easy-to-read digital display provides users with real-time feedback on mixing speed and time, enhancing the overall user experience.

Another notable characteristic of the 5000 Series is its easy-to-clean features. The mixer comes with a detachable bowl and mixing attachments that are dishwasher-safe, making cleanup a breeze. The mixer’s sleek, modern design also means that it looks great on any kitchen countertop, merging style with functionality.

Safety is paramount with the Kuhn Rikon Verti-Maxx Mixer. It includes a safety lock mechanism that prevents the motor from running unless the bowl and lid are securely in place. This thoughtful feature ensures peace of mind while mixing even the heaviest of ingredients.

Overall, the Kuhn Rikon Verti-Maxx Mixer, 5000 Series, embodies state-of-the-art kitchen technology, combining practical features with elegant design. Its unique vertical mixing approach, powerful motor, and user-friendly interfaces make it an essential tool for any cooking enthusiast looking to elevate their culinary creations.
Top Page Image Contents