ENGLISH
Maintenance
After finishing a recording
✤At the end of a recording you must remove the power source.
✤When recording with a Lithium Ion Battery Pack, leaving the pack on the camcorder can reduce the life span of the battery. Hence, it should be removed from the camcorder.
After completing a recording session
1. Slide the TAPE EJECT switch in the direction of the arrow. | 1 | |
■ Opening the cassette door ejects the tape automatically. | REV | |
■ Please wait while the tape is completely ejected. | S.SHOW | |
| FWD | |
2. After removing the tape, close the door and store the camcorder in a dust free | DELETE | |
environment. |
| |
■ Dust and other foreign materials can cause | 3 | |
images. | ||
MEM | ||
| ||
3. Set the power switch to the OFF mode. | OFF | |
MEM/P | ||
|
4. Disconnect the power source or remove the Lithium Ion Battery Pack.
■When disconnecting a power supply, separate it in the reverse order as connecting it, by referring to page 21.
■Hold down the BATTERY RELEASE button and slide the battery pack in the direction of the arrow.
2 |
4 |
89
