Section H- Operation and maintenance

4

(continued..)

 

5.The slide type air controls can be slid open to allow more air to the fire, thus increasing the fire size, rate of burn, and heat produced. Likewise, sliding the air controls closed or decreasing the air to the fire decreases the fire size, rate of burn, and heat produced.

6.Never leave your stove unattended with the door open. When the stove door is open it will be necessary to open the by-pass to prevent smoke spillage.

7.CAUTION: When building the first couple of fires be careful to build the fire small and increase heat slowly over a 4-5 hour period. The paint on the stove “cures” with heat and this process needs to be done slowly. As the paint “cures” it gives off a smell of paint and sometimes a visible “smoky” haze in the room. Make sure the area is well ventilated during the curing operation. The smell will disappear after a few hours of operation.

Section I- Catalyst Replacement

Gasket Replacement:

Periodically, gasket on your wood stove will need to be replaced. The following is a list of parts and sizes of gasket used:

1)Door Gasket: 5/8” diameter (5 ft.)

2)Glass Gasket: Window channel with adhesive (5 ft.)

3)Catalytic Gasket: 1/16”x 3” (8 ft.)

4)By-pass Gasket: 1/8”x 1 1/2” (3 feet required)

*SEE FIGURE 1 FOR LOCATIONS OF GASKET*

CATALYTIC REPLACEMENT STEPS:

1)Pull insert or stovepipe out.

2)Remove by-pass rod by unscrewing fastening nuts. (A)

3)Lubricate and remove the 4 main holding bolts. (B) You may need to support the baffle before doing this, as it is heavy.

4)Remove entire catalytic baffle system from stove.

5)Lift off catalytic hold-down clamp noting location of all gasket. (C)

6)Slide catalytic units up and out. (D)

7)Rewrap new catalytic units with new 1/8”x 3” gasket, or replace with pre- wrapped catalytic assembly in stainless steel enclosure.

8)Re-install catalytic units in place being careful to have a ‘snug’ fit. It may be necessary to add more gasket to achieve a snug fit.

9)Replace catalytic hold-down clamp and re-gasket top area with gasket (1/8”x 3”) as shown in Figure 1.

10)Re-install entire catalytic baffle system with 4 bolts and hook up by-pass rod with nuts.

11)Double check bolts and fasteners for tightness.

Note: If the steel baffle (catalytic enclosure) system is warped or degraded, an entire baffle system with catalytics and gasketing already installed may be ordered and replaced as a unit. Contact your dealer.

Page 4 Page 6
Page 5
Image 5
Kuma Stoves K-300, K-400 manual Section I- Catalyst Replacement, See for Locations of Gasket
Page 4 Page 6

K-400, K-300 specifications

Kuma Stoves has built a reputation for delivering high-quality wood stoves that combine efficiency, longevity, and aesthetic appeal. Among their impressive lineup, the K-300 and K-400 models stand out for their advanced features and innovative technologies, making them popular choices for those looking to add an efficient heating solution to their homes.

The Kuma Stoves K-300 is designed for small to medium-sized spaces, offering a compact yet powerful heating option. One of its main features is the high-efficiency burn technology, which maximizes heat output while minimizing emissions. This stove is equipped with a secondary combustion system that ensures the fuel is burned thoroughly, resulting in fewer particulates released into the atmosphere. The K-300 also boasts an impressive heat output range, providing warmth in even the coldest climates.

In contrast, the K-400 is engineered for larger spaces, providing an extra boost of heat with its higher capacity. This model is known for its robust construction, featuring a heavy-duty steel plate body that enhances durability and lifespan. Similar to the K-300, the K-400 utilizes advanced combustion technology, optimizing the use of wood fuel and enhancing efficiency. It's designed with a large firebox, allowing for longer burn times and accommodating larger logs, which translates to fewer refueling interruptions.

Both models incorporate Kuma's distinctive Air Control System, allowing users to easily adjust the airflow for more precise temperature regulation. This feature not only enhances user convenience but also plays a critical role in maximizing combustion efficiency.

Aesthetically, both the K-300 and K-400 showcase a modern design, featuring a large glass door that offers an unobstructed view of the fire, enhancing any living space's ambiance. The stoves are also available in various finishes to match different decor styles.

Environmentally conscious consumers will appreciate that both models meet stringent EPA certification standards, ensuring that they burn cleanly and efficiently. With their blend of technology, craftsmanship, and style, Kuma Stoves' K-300 and K-400 models represent an ideal choice for anyone looking to add a reliable and effective wood heating solution to their home. Whether you have a smaller space or a larger area to heat, these stoves deliver performance without compromising on aesthetics or environmental responsibility.
Top Page Image Contents