HTC LZC5227 / 965879701 Cutter Blades, Blade Replacement, maintenance, Important Information

maintenance

Cutter Blades

To attain the best mowing effect, it is important that the blades are well sharpened and not damaged.

WARNING!

Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling.

Bent or cracked blades or blades with large nicks should be replaced.

Damaged blades should be replaced when hitting obstacles that result in a breakdown. Let the service workshop decide whether the blade can be repaired/ ground or must be replaced.

Balance the blades after sharpening. Check the blade mounts.

IMPORTANT INFORMATION

The sharpening of blades should be carried out by an authorized service workshop.

Blade Replacement

•Remove blade bolt by turning counterclockwise.

•Install new or re-sharpened blade with stamped “GRASS SIDE” facing towards ground/grass (down) or “THIS SIDE UP” facing deck and cutter housing.

•Install and tighten blade bolt securely.

•Torque blade bolt to 90 ft/lbs (122 Nm).

8011-604-02

Check the blades

2

1

3 4

8058-013-1

1.Blade

2.Cutter housing

3.Washer

4.Blade bolt, special Blade attachment

IMPORTANT INFORMATION Special blade bolt is heat treated. Replace with a Husqvarna bolt if required.

Do not use a lower grade hardware than specified.

46 - Husqvarna