CONTROLS
Cutting height lift pedal
On some models, there is a deck assist lift pedal to aid in maneuvering the deck lift.
IMPORTANT INFORMATION
To obtain an even cutting height it is important that the air pressure in all four tires is the same 15 psi (1 bar).
Lift pedal
Pump release valves
IMPORTANT INFORMATION
Only rotate the valve ¼ to ½ turn to release the system.
Tighten the valve moderately.
Do not overtighten the valve when closing. Overtightening can damage the valve seat.
Pump release valves are located on the pumps. These valves release the system so the machine may be moved by hand when not running. Tilt the seat forward to gain access to the valves. Use a 5/8" wrench to open the valve.
Pump release valve
Husqvarna - 25
