HTC LZC6130 / 965879801 manual Choke control, Throttle control, Mower Deck Lifting Lever, Controls

CONTROLS

Choke control

The choke control is used for cold starts to provide the engine with a richer fuel mixture.

For cold starts, pull the control out to its extent.

Throttle control

The throttle control regulates the engine speed and thereby the rate of rotation of the blades, assuming the blade switch is pulled out (see Engaging the Mower Deck).

To increase or decrease the engine speed, the control is moved forward or back respectively.

Avoid idling the engine for long periods, as there is a risk of fouling the spark plugs.

For best mower performance and battery charging,

USE FULL THROTTLE WHEN MOWING.

Mower Deck Lifting Lever

The lifting lever is used to place the mower deck in the transport position or one of the 17 different cutting height positions.

The cutting height is set by placing a peg in the hole for the desired cutting height and the peg is then locked on the inside (hidden in illustration) with the supplied pin.

•Pull the lever backward to the locked position to engage the transport position. The deck is then fully raised.

•To lower, squeeze the lock handle up to the lifting lever while moving the lever forward. When the lever meets the set peg, the desired height is set.

•The lifting lever can also be used to temporarily adjust the cutting height, such as when passing over a minor bump in the lawn.

8011-508

Choke control

8011-509

Throttle control

1

2

3

8011-753

1.Lifting lever

2.Lock handle

3.Set peg

Mower deck lifting lever

24 - Husqvarna