OPERATION
10.When the engine starts, immediately release the ignition key back to the run position.
IMPORTANT INFORMATION
Do not run the starter for more than 5 seconds each time. If the engine does not start, wait about 10 seconds before retrying.
11.Push the choke control in gradually when the engine has started.
12.Set the desired engine speed with the throttle. Allow the engine to run at a moderate speed, “half throttle”, for
(no choke).
WARNING!
Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects or other reproductive system damage. The engine exhaust contains carbon monoxide, which is a odorless, colorless, poisonous gas. Do not use the machine in enclosed spaces.
Return to run position
Press in the choke control
Set the engine speed
30 - Husqvarna
