Kuppersbusch USA KGCT 907.2E The cooking setting, Extending and retracting cooking area

Extending and retracting cooking area The cooking setting

The cooking area cannot be extended and retracted unless the appliance is switched on.

If you touch the button , the coo- king area is extended.

The rear cooking zones can only be used in the fully extended condition.

You have 9 cooking settings available.Select the required cooking setting with the plus- or minus-sensor. It will be indicated in the display.

The pan-detection function must either be deactivated or a pan that is suitable for detection by the pan-detection function must have been placed on the cooking zone in order to be able to select a setting for the cooking zone.

If you touch the button , the coo- king area is retracted.

If the button is pressed when the cooking area is switched on, an acoustic signal is emitted.

The cooking area cannot be retracted,

if the rear cooking zones are switched on,

if the retraction function is interrupted by the safety strip being pressed slightly to the rear, e.g. by kitchenware.

Caution: If the cooking area is retracted and extended consecutively very fre- quently, a safety cut-out facility is activated. This prevents the motor from overheating. The moving part of the cooking area can no longer be retracted or extended for a brief period.

If the moving part of the cooking area is blocked during extension or retraction, a force-dependent safety cut-out responds and interrupts the „travel operati- on“. If the blockage lasts a lengthy period, the moving part no longer moves back into the end position.

In this case press the buttons and , to move the moving part of the cooking area back into its end position.

or

The “0” position is visible for about 2 seconds after the appliance switches off.

Cooking setting	Suitable for
1-3	Heating, warming
	creeing, defrosting
4-5	Steaming, poaching
	boiling
6-8	roasting, deep-frying
9	Heating large quantities

When pressing the plus-sensor the cooking zone starts at cooking set- ting 5, without boost.

When pressing the minus sensor the cooking zone starts at cooking setting 9.

This automatically starts the auto- matic boost.

Switching off the cooking zone:

Press the plus- and minus-sensor at the same time.

and

KGCT 907.2E 17