If no pan or an unsuitable pan is put onto the cooking zone, an un- derlined “U” is indicated. After
1 minutes the cooking zone auto- matically switches itself off.
Switching off the pan recognition function
(e.g. when using glass pans or other pans that are unsuitable for use with the saucepan sensor)
and
Press the plus- and
A circle will appear in the display next to the selected cooking set- ting.
There is a defect in the pan re- cognition function, if this circle li- ghts up.
You can nevertheless continue to use the cooking zone.
The automatic pan size sensor of the dual circuit zone
The dual circuit zone has a sensor to detect the size of the pan being used.
When a small pan is placed on the cooking zone, only the inner ring will switch on. If the entire zone is covered by the pan, both rings will switch on.
Please note that the outer ring must always be completely covered, even if you are using pans with a rounded base.
Moving the pan during cooking can cause the outer ring to switch off if it has
not been completely covered.
ΦThe outer cooking zone circuit can also be switched on and off when the
Some instructions on cookware
Only use pans with even and flat bottoms.
Uneven pan bottoms prolong the boost
times and increase the power require- ment. Rough pan bottoms scratch the
porcelain cookware, please follow the manufacturers instructions.
Choose a pan with a diameter at least as large as the cooking zone.
You will thereby save energy and coo- king time. You will also avoid over- heating of the cooking area.
Wherever possible, place a lid on the pan.
You will save a lot of energy by coo- king in a closed pan. Liquids and foods will only boil over if the tempe-
rature is too high. For the cooking zo- nes, you can precisely set the
temperature required. With a little practice, you will readily make the correct choice of cooking settings so that nothing boils over even when a lid is in place.
The rapid switch-off function
All the cooking zones can be swit- ched off quickly with the
KGCT 907.2E | 19 |