Kuppersbusch USA KGCT 907.2E function, Cooking zone heating indicator, Dual-circuitcooking zones

If the sensor of a rear cooking zone is touched when the cooking area is retracted, the symbol „ “ ap- pears in the display and an acou- stic signal is emitted.

The automatic boost

function

Cooking zone heating indicator

As long as the cooking zone is still hot, an “H” will appear in the dis- play when the cooking zone has been switched off.

All cooking zones are equipped with an automatic boost function. Maximum power is used for the boost. The time period of the boost depends on the selected cooking setting. After the elapsed time the cooking zone automatically switches back to the selected cooking setting.

ΦThe automatic cooking function will be deactivated if the pan-detection function is activated and the pan is taken off the cooking zone. The au-

tomatic cooking function will continue to operate once the pan has been put back onto the cooking zone.

When selecting the respective coo- king setting by pressing the minus- sensor, the boost function swit- ches on automatically.

Dual-circuit cooking zones

Usually the cooking zone with the smaller diameter is being heated.

Switch on the outer cooking zone circuit for bigger sauce pans.

Press the cooking zone symbol next to the plus/minus sensor. The light on the left below the symbol for the dual-circuit-cooking zone indicates that the cooking zone has been activated.

Pressing the cooking zone symbol once again deactivates the dual circuit cooking zone.

2 mal

During automatic operation a "A" lights up in the display alternately with the selected cooking setting.

When selecting the required coo- king setting by pressing the plus- sensor, it is necessary to press the plus-sensor again after reaching cooking setting 9 if the automatic boost function is to be activated.

Select the required cooking set- ting.

“A” lights up in the display alterna- tely with the selected cooking set- ting.

The grill area

The setting of the grill area you want can be selected with the plus- or the minus-sensor.

or

Preheat the grill area for about 5 minutes at setting 9. Grill the food on each side at setting 9 for 1-2 minutes, then turn down and finish the grilling pro- cess.

The grill area can also be used as an area for keeping food warm at setting1. In this case do not apply oil to the grill area!

The pan recognition function

All cooking zones have a saucepan sensor. The dual-circuit zone is also able to detect the saucepan size.

ΦThe pan-detection function detects all pans made of metal.

The pan-detection function must be deactivated in order to use cooking equipment made of glass or ceramics.

If a suitable pan is put onto the cooking zone, “U” is indicated by the display.

18 KGCT 907.2E