Rear Panel

1

5

 

A

A

51

BREAKER

MODEL: GROOVE 600™

RISK OF ELECTRIC SHOCK

DO NOT OPEN

ATTENTION

RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR

SERIAL NUMBER

CAUTION

CHASSIS SURFACE HOT

DESIGNED IN USA

ATTENTION

SPEAKER OUTPUT

MADE IN CHINA

SUPERFICE DE CHASSIS CHAUDE

TUNER OUT

GROUND

PRE EQ

 

LIFT

POST EQ

 

LINE LEVEL

 

DIRECT OUTPUT

 

EFFECTS LOOP

 

SEND

RETURN

FOOTSWITCH

qCircuit Breaker:

This circuit breaker will trip when too much current is applied to the amplifier. To reset: Turn off POWER switch, allow to cool for a few minutes, then press circuit breaker button, and turn the POWER switch on. Note: If the Circuit Breaker trips repeatedly when AC power is applied, take the amplifier to an authorized service center for repair.

PowerCord:

This supplies AC power to the amplifier. If the cord becomes damaged, take the amplifier to an authorized service center for repair.

uDirect Output Jack:

This is a line level output used to connect the amplifier to another device, such as a mixer or recorder.

vPre EQ/Post EQ Switch:

When set to Pre EQ, the DIRECT OUTPUT signal will be unaltered by the EQ sections of the preamp. When set to Post EQ, the DIRECT OUTPUT signal will reflect the entire sound (including EQ settings) of the preamp. Note: The MASTER volume Control (front panel #12) and SOLO ON/OFF switch (front panel #15) have no effect on the DIRECT OUTPUT signal.

sSpeaker Outputs:

Use these jacks to connect the amplifier to speaker cabinets using heavy duty Speakond speaker cables. These jacks are connected together internally. See Amplifier Loading Chart (Page 8) for speaker cabinet loading information. Note: To prevent overheating and possible loss of signal, do not connect a load lower than 2 ohms. Be sure power is off before making any speaker connections. To connect a cable: Align tab on speaker cable connector slot. Insert and twist one quarter turn clockwise to lock. To remove a cable: Pull back release button on cable connector, twist connecter counter clockwise one quarter turn, and pull out connecter.

tGround Lift Switch:

Activating this switch removes the ground connection on the DIRECT OUTPUT Jack (#21). Activate this switch, if necessary to eliminate hum.

wTuner Out Jack:

Use this jack to connect to a tuner or other line level device. This jack is always active and is a pre-gain output.

xEffects Send Jack:

Use this jack to connect to the input of an external effects processor. This jack can also be used as a preamp out.

yEffects Return Jack:

Use this jack to connect to the output of an external effects processor. This jack can also be used as a power amp in. The preamp output signal is disconnected from the power amp when using this jack.

zFootswitch Jack:

This 3-conductor 1/4” jack is for connecting a footswitch (sold separately) to the amplifier. The footswitch will then control the Mute and Solo features. Using this jack overrides the front panel MUTE and SOLO switches.

7

Page 6 Page 8
Page 7
Image 7
Kustom GROOVE 600TM owner manual Rear Panel, Serial Number
Page 6 Page 8

GROOVE 600TM specifications

The Kustom GROOVE 600TM is a cutting-edge audio amplifier designed for musicians and sound enthusiasts seeking powerful performance and versatility. This dynamic amplifier stands out in the crowded market of musical equipment due to its innovative features and robust technologies, making it a top choice for both live performances and studio sessions.

One of the defining characteristics of the Kustom GROOVE 600TM is its impressive power output. With 600 watts of peak power, it delivers the punch needed for larger venues, ensuring that your sound can be felt as well as heard. This power is complemented by exceptional clarity and dynamic range, allowing for detailed sound reproduction across genres, from rock to jazz to electronic.

The Kustom GROOVE 600TM employs advanced digital signal processing (DSP) technology, which enhances the overall sound quality. This technology enables the amplifier to deliver crisp highs, warm mids, and solid lows, creating a well-balanced audio experience. The integrated effects processor also offers a variety of effects, such as reverb and delay, providing musicians with the tools necessary to create unique and captivating performances.

Another notable feature of the Kustom GROOVE 600TM is its user-friendly interface. With intuitive controls, including sliders and knobs, musicians can easily adjust settings to achieve their desired sound. It also features multiple inputs and outputs, allowing for seamless connectivity with a range of instruments and devices, such as guitars, keyboards, and microphones. This flexibility makes it suitable for solo artists, bands, and recording setups.

Durability is a key characteristic of the Kustom GROOVE 600TM. Built with high-quality components and a rugged chassis, it is designed to withstand the rigors of regular use, whether on stage or in the studio. The compact design also makes it portable, allowing musicians to transport it with ease.

In summary, the Kustom GROOVE 600TM is a powerful, versatile, and reliable audio amplifier. Its combination of high wattage, advanced DSP technology, user-friendly interface, and robust construction makes it an excellent choice for musicians at all levels. Whether performing live or recording in a studio, the Kustom GROOVE 600TM delivers exceptional sound quality and performance, making it a valuable addition to any musician's gear.
Top Page Image Contents