KPM8420TSpecifications
12
Model KPM8420T 8 Channel Dual Powered Mixer
200W per channel 4 Ohms @ 5% THD
180W per channel 4 Ohms @ 0.4% THD
-115dB Mic Input, Rs=150 ohm, 20-20kHz
-55dB ResidualNoise, alllevel controls 0% (mini mum)
-45dB NominalSy stem Noise, all levelcontrols at 50%
90 dB Mic to Power Amp (Ch 1 - Ch8) Pad Off
77dB Mic to Power Amp (Ch 1 - Ch8) Pad On
72dB Line to Power Amp (Ch 1 - Ch8) Pad Off
60dB Line to Power Amp (Ch 1 - Ch8) Pad On
36dB Playback to Power Amp
50dB Mic to Main out, Pad On
50dB Mic to Monitor out, Pad On
50dB Mic to Record out, Pad On
Crosstalk 70dB Channel to Channel, 1kHz
Input Channel Equalization
Master Equalization
Phantom Power +40V Applied toall Mic inputs when active
USA/Canada 120VAC/60Hz, 300W nominal
Europe 230VAC/50Hz, 300W nominal
UK 230VAC/50Hz, 300W nominal
Australia 240VAC/50Hz, 300W nominal
Japan 100VAC/50-60Hz, 300W nominal
mm/kg 292 ( Height)x 495 (W idth) x305 ( Depth), 15.6kg
Inches/Pounds 11.5 (Height) x19 ( Width) x 12.1 (Depth), 34.4 lbs
Recommended: KUSTOM m odelKAC-FS-202 (dual switchwithLEDs)
SmallRoom,Large Room, SmallH all,Double Take , Chorus, Chorus Rev erb, Slapback,Delay
Module2:
ShortRoom, Med Room, SmallHall, Med Hall,Chor us,Chor us Reverb, Chorus Hall, ShortDelay
Digital effects On/Off and Channel ON/OFF (playback remains active)
Special curve that adjustsBass, Mid, and Treble frequencies
100 to 10kHz,7 Band, 1 Octave Graphic, all ±12dB
Module1:
Two24 bit DSP modules, 8 effec tsper module.
TotalHarmonic Distortion
Frequency Response 20HZ-20kHz Ac tualresponse is tailored to speaker cabinet for
accurate acoustical response.
Less than 0.4% Measured at 1VRMS (0dBv) at record output, effects
send, preamp output, or Main output.
SystemGain
Dimensions
Power Requirements
AllMeasurements made at 1kHz
DigitalEffects
OutputPower
Hum & Noise
Footswitch