FAX Operation (Advanced)
4-4

Broadcast Transmission

This function allows you to send the same originals to several destinations in one operation. The machine stores
(memorizes) originals to send in memory temporarily, and automatically repeats dialing and transmission to the
set destination afterwards.
NOTE: You can send originals to up to 100 destinations in one operation.
You can use this function together with sub address communication and delayed transmission.
When direct transmission has been selected, it changes to memory transmission at the time of transmission.
In addition to fax, you can include e-mail transmission and/or folder (SMB/FTP) transmission in a single
transmission job (Multi Sending). Press the Send key to select the destinations. For details, refer to Sending in
the Operation Guide for the machine.
1Press the FAX key.
2Place the originals.
3Select the destination.
Enter the fax number
1Use the numeric keys to enter the fax number.
NOTE: When On is selected in Entry Check for
New Destination, a confirmation screen is
displayed for the entered FAX number. Re-enter
the same FAX number and press the OK key. For
details, refer to Destination confirmation screen
before transmission in the Operation Guide for the
machine.
2Press the OK key. You can enter the next fax
number.
Select the destination from the Address Book
1Press the Address Book key.
2Press the U or V key to select [Address
Book].
3Press the U or V key to select the desired
destination.
4Press the OK key. You can select the
destination by pressing the Address Book
key.
Select the destination from the One-touch keys
Press all the One-touch keys to which necessary
destinations are registered.