FAX Operation (Advanced)
4-13
4
2Lift the handset of the telephone.
3Check if the telephone line has connected to the
fax of the sending system.
When you hear the fax tone
The sending system is on fax.
1Press the Status/Job Cancel key.
2Press the On Hook key.
3Press [ManualRX] (the Left Select key).
Reception will start.
NOTE: When using a telephone set that can
send tone signals, use the telephone to start the
reception of originals with the remote switch
function. (Refer to Remote Switch Function on
page 4-14.)
When you hear a voice from the receiving
system
The telephone line has connected to the telephone
of the sending system. When the conversation is
over, follow steps 1 to 2 above.
After the sending system has started transmission,
the machine starts receiving originals.
4When reception starts (when the Processing
indicator on the operation panel starts blinking),
return the handset to its original position.