8VHU*XLGHIRUWKH.\RFHUD.3KRQH
5SENDING AND RECEIVING TEXT MESSAGES
This chapter describes how to send, receive, and
erase text messages from your phone.
Important: The features and menus described in
this chapter may vary depending on services
available in your area. In addition, usage charges
may apply to each message. For clarification on
these issues, check with your service provider.
Sending text messages
Check with your service provider to find out if you
are able to send text messages from your phone.
You can only send text messages to phones that are
capable of receiving them.
Sending a new text message
1. Select Menu → Messages → Create
Message.
2. Enter the number
-or-
select the number from your contacts list by
pressing at the text entry screen, scrolling
to Contacts, and pressing again. Select the
number you want and press .
3. Select Continue to enter your message.
To learn how to enter letters, “Entering Letters,
Numbers, and Symbols” on page13.
4. When you have completed the message, select
Continue and press to Send.
Sending a pre-written message
Your Kyocera K112 comes with a set of commonly
used messages, such as “Call me”, “Emergency”,
“Need directions.”
1. Select Menu → Messages → Preformatted
Message.
2. Scroll through the list of messages and press
.
3. Enter the phone number manually or select
from the All Contacts list and press to
continue.
4. Edit the contact when prompted.
5. Select Send or Save. If you select Save, your
message is placed in your Outbox.
82--K5456-1EN.book Page 19 Thursday, November 6, 2003 5:16 PM