1GETTING STARTED
This document describes the Kyocera K112 phone, with CDMA digital and analog service at 800 MHz.
Your phone comes with an integrated, rechargeable Lithium Ion (LiIon) battery, which is not fully charged.
Inserting your RUIM card
The RUIM card is supplied by your service provider when you register as a user. It contains all the important data pertaining to your phone.
Important: Make sure that the phone is turned off and is disconnected from the charger before you insert or remove the RUIM card
1.Hold the phone face down.
2.Remove the RUIM card cover located at the lower end of the phone by sliding it down.
3.Place the RUIM card into its compartment with the metal contacts facing down and the cut corner to the left.
4.Slide the RUIM card cover back onto the phone until it latches. Do not force.
Charging the battery
Fully charge the new battery for approximately 12 hours before using the phone for the first time.
To charge the battery, connect the power adapter to the jack located at the bottom left of the phone,
then connect the adapter’s plug to a wall outlet.
The battery icon at the
•Charging (animated icon)
•Partially charged .
•Fully charged .
•Low battery . Icon blinks and the phone beeps. The phone screen displays a “Low Battery” message. When the battery is completely drained the phone powers off.
@= |