User Guide for the Kyocera K322 Phone 9
2MAKING AND ANSWERING CALLS
Making a call
Make sure you are in an area where a signal can
be received. Look for the symbol on the home
screen. The more bars you see in this symbol, the
stronger the signal. If there are no bars, move to
where the signal strength is better.
When the phone has been idle for a time, it
changes to power save mode. Press any key to
return to normal operating mode.
1. Open the flip.
2. Enter the phone number and press .
3. Press or close the flip to end the call.
Voice or Digit dialing
You can make a voice call by speaking the name
of the person/place you want to call
- or -
you can speak the digits of a phone number.
Note: Voice call requires that a contact be saved
with a voice tag. See “Creating a voice tag for a
contact” on page44.
1. Press .
2. Follow the voice prompts to initiate voice or
digit dialing. The phone places the call.
3. Press to end the call.
Answering a call
When a call comes in, the phone rings, vibrates,
orlights up. The phone number of the caller
appears on the screen if it is not restricted. If the
number is stored in your Contacts directory, the
contact name appears.
1. Open the flip.
2. Press to answer the incoming call.
- or -
Press to answer the incoming call and
turn on the speakerphone.
Answering calls using the flip
You can set the phone to answer immediately
when you open the flip. This feature does not
apply to incoming data or fax calls.
• Select Menu → Settings → Convenience →
Open to Answer → Enabled.
– Select Disabled to have the phone
continue ringing when you open the flip.
Adjusting the volume during a call
• To adjust the earpiece or speakerphone
volume during a call, press up
or down.
82-N8863-1EN.book Page 9 Wednesday, May 17, 2006 1:22 PM