46 Using Voice Recognition
To activate the Voice Wake-up setting:
• Select Menu → Settings →
Voice Features → Voice Wake-Up →
Withaccessory.
To wake up the phone:
1. Say “Wake Up” and listen for a tone.
2. Say “Wake Up” again until you hear two tones.
If the phone does not recognize your
“Wake up” command, see “Training voice
recognition” on page47.
Answering the phoneYou can set your hands-free car kit to
(1) answer automatically or (2) answer using
avoice command.
Answering automatically
You can set your phone to answer automatically.
Note: This setting also works with the portable
hands-free car kit.
• Select Menu → Settings → Accessories →
Auto-Answer → After 5 secs.
Answering using voice commands
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
installed hands-free car kit.
• Select Menu → Settings → Accessories →
Auto-Answer → Disabled.
To activate the Voice Answer setting:
Note: The accessory must be attached to use
this feature.
1. Select Menu → Settings →
Voice Features → Voice Answer.
2. Highlight Enabled and press .
3. Select Menu → Settings → Silent Mode →
Normal Sounds, then press .
To answer a call:
When you receive an incoming call, the phone
responds: “Incoming call, answer?” or “Incoming
roam call, answer?” If the caller is recognized as a
contact entry in your phone, then the phone will
say “Incoming call from (Name), answer?”
• Say “Yes” or press any key except .
Ignoring an incoming call
To ignore an incoming call, do one of
thefollowing:
• Say “No” and press to silence the alert.
• Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
home screen.
82-N8863-1EN.book Page 46 Wednesday, May 17, 2006 1:22 PM