Kyocera K342 manual Making a call, Answering a call, Silencing an incoming call

2MAKING AND ANSWERING CALLS

Making a call

Make sure you are in an area where a signal can be received. Look for the symbol on the home screen. The more bars you see in this symbol, the stronger the signal. If there are no bars, move to where the signal strength is better.

When the phone has been idle for a time, it changes to power save mode. When you see “Power Save” on your phone’s screen, press any key to return to normal operating mode.

1.Open the flip.

2.Enter the phone number and press .

3.Press or close the flip to end the call.

Making a call using voice commands

You can use voice commands to call a contact from your voice dial list or to dial a phone number. See Voice Commands, Chapter 8 on page 43.

Answering a call

When a call comes in, the phone rings, vibrates, or lights up. The phone number of the caller also appears if it is not restricted. If the number is stored in your Contacts directory, the contact name appears.

•Press to answer the incoming call. -or-

•Press to answer the incoming call and turn on the speakerphone.

Answering calls using the flip

You can set the phone to answer immediately when you open the flip. This feature does not apply to incoming data or fax calls.

•Select Menu → Settings → Convenience → Open to Answer → Enabled.

–Select Disabled to have the phone continue ringing when you open the flip.

Adjusting the volume during a call

•To adjust the earpiece volume during a call,

press up or down.

Silencing an incoming call

•Press or .

Note: In the absence of voicemail, this feature drops the call.

- or -

•Press then press to answer the call.

This action silences the current call only. The next call will ring as normal.

8 Making and Answering Calls