Kyocera K342 Tips before operating your, photos, Using The Camera, Accessing camera mode

9USING THE CAMERA

Tips before operating your				3. Highlight an option and press		:
camera				–	Flash options are On, Off, or Automatic.
•	You cannot activate the camera while			–	Resolution options are 1280 x 1024 (best
					for printing), 640 x 480, 320 x 240 (best
	on an active call or while browsing files in the
					for sending to email), and 160 x 120.
	media gallery.
				–	Low Light Mode brightens the picture for
•	Once the camera is active, the home screen
					low light environments.
	acts as the viewfinder.
				–	Self Timer options are Off (default) or 3,
•	If you get a “Low memory” error, check
					5, or 10 second pauses. When set, the
	your resolution and quality compression
					camera beeps from 3 seconds down to the
	settings. See “Setting up the camera for
					time the shutter snaps the picture
	photos” on this page.
					automatically. Self Timer is not available
•	If there is no activity within 45 seconds after
					when Multishot mode is activated.
	you turn your camera on, the camera quits
				–	Multishot allows you to take up to six
	and returns to the previous launch point.
					multiple pictures while the camera key is
•	Menu settings and options can only be
					pressed and held. A tone will play each
	accessed when the camera is active.				time a picture is taken. A second tone will
Accessing camera mode					play when the final picture is taken.
				– Shutter Sound sets the sound used when
•	Press	until you hear two beeps
					the camera takes a picture.
	to activate camera mode or select			–	White Balance allows the camera to adjust
	Menu → Camera.				for different lighting. Options are
Setting up the camera for					Automatic, Fluorescent, Incandescent,
					or Daylight.
photos				–	Color Tone sets the color tone of
1.	While in Camera mode, press		to		the picture.
	select Options.

2.Press to select Settings.

48 Using the Camera