Kyocera K612b manual Phone calls, Making and Answering Calls

2MAKING AND ANSWERING CALLS

Phone calls

Making a call

Make sure you are in an area where a signal

can be received. Look for the symbol on the home screen. The more bars you see in this symbol, the stronger the signal. If there are no bars, move to where the signal strength is better. When the phone has been idle for a time, it changes to power save mode. When you see your phone’s screen dim, press any key to return to normal operating mode. The following instructions apply to either the number keypad (flip closed) or the QWERTY keypad (flip open), unless otherwise stated.

Entering a number

1.On a keypad, enter the phone number and

press .

2.Press to end the call.

Using voice dialing

Voice dialing requires that a contact be saved with a voice tag. See page 58.

1.Press and hold to initiate voice dialing.

2.Say the name of the contact when prompted. The phone places the call.

3.Press to end the call.

Answering a call

When a call comes in, the phone rings, vibrates, or lights up, and an animated icon appears.

The phone number of the caller also appears if it is not restricted. If the number is stored in your Contacts directory, the contact name appears.

•Press to answer the incoming call. -or-

•Press to answer the incoming call and turn on the speakerphone.

Adjusting the volume during a call

•To adjust the earpiece volume during a call,

press the side volume keys up or down.

Silencing an incoming call

•Press or the left softkey to select Silence.

Note: In the absence of voicemail, this feature drops the call.

- or -

•Press then press to answer the call.

This action silences the current call only. The next call rings as normal.

User Guide for the Strobe Phone 11