Kyocera K612b manual Tips before operating your camera, Accessing camera mode, Camera settings

7USING THE CAMERA

Tips before operating your camera

•You cannot activate the camera while on a call.

•Once the camera is active, the home screen acts as the viewfinder.

•If you get a “Low memory” error, check your resolution and quality compression settings. See “Setting up the camera” on this page.

•If there is no activity within 45 seconds after you turn your camera on, the camera quits and returns to the previous launch point.

Accessing camera mode

The camera can be used with the flip open or closed.

Flip closed

Press the external camera key until you hear one beep to activate camera mode.

Flip open

Press until you hear one beep to activate camera mode.

Camera settings

1.Press and hold to activate Camera mode.

2.Press the right softkey to select Options .

3.Press to select Settings.

4.Highlight an option and press :

–Flash options are Off, On, or Automatic.

–Resolution options are 640 x 480,

320 x 240 (best for sending to email), and

160 x 120.

–Low Light Mode brightens the picture for low light environments.

–Self Timer options are Off (default) or 3, 5, or 10 second pauses. When set, the camera beeps from 3 seconds down to the time the shutter snaps the picture automatically. Self Timer is not available when Multishot mode is activated.

–Multishot allows you to take up to six multiple pictures while the camera key is pressed and held. A tone plays each time a picture is taken. A second tone plays when the final picture is taken.

–Shutter Sound sets the sound used when the camera takes a picture.

38