Kyocera KM-F1060 manual Transmission Settings, Halftone 600 dpi

2

Select the desired
Transmission setting.	3a
(See the column on		Quick Name Search Email Addressing
the right)	or
(	3b	One-Touch/ABBR. Email Addressing)
	and/or
	3c	Manual Email Addressing
	and/or
4	3d	Directory Search Email Addressing

You can send the same document(s) to multiple stations. Multiple stations can be selected by any combination of the Steps 3a (3b), 3c and/or 3d, and then

pressing START .

The document(s) is stored into memory with a file number. Then starts sending the document(s).

Transmission Settings

Adjusting the Contrast of scanned image data by pressing cursor keys ( / ).

Lighter Normal Darker

CONTRAST

- [ ] +

(See Note 4)

STANDARD for standard originals

FINE for detailed originals

S-FINEfor finer detailed originals

600 dpi for 600 dpi detailed originals

HALFTONE (FINE)

for photo originals with Fine Resolution

HALFTONE (S-FINE)

for photo originals with S-Fine Resolution

HALFTONE (600 dpi)

for photo originals with 600 dpi Resolution

Verification Stamp

ON : The light is lit.

OFF : The light is off.

1. If your machine sounds an alarm (pi-pi-pi) in Step 3 above, this indicates that the Auto Dialer

NOTE is Full (More than 50 full email addresses are entered or 50 transmission reservations

including G3 communication jobs have been already reserved).

2. To utilize the Email functions, your machine needs to be set up properly on your network. Please contact your network administrator for actual network setup.

3. Auto Dialer (Address Book or One-Touch/ABBR.) is only available when stations are registered.

4. When transmitting at S-Fine or 600 dpi, there is a possibility that printing quality may deteriorate at the remote station due to its reception capability. If this occurs, re-send with Direct Transmission or use "Fine" Resolution.

5. You can search for another name starting with the same character by scrolling with the Cursor Keys ( / ).

5